Abichou, T., Benson, C., and Edil, T. (1998), Database on Beneficial Reuse of Foundry By-Products, Recycled Materials in Geotechnical Applications, GSP No. 79, ASCE, C. Vipulanandan and D. Elton, eds., 210-224. [pdf]

Abichou, T., Edil, T., Benson, C., Berilgen, M. (2002), Mass Behavior of Soil-Tire Chip Backfills, Proc. Conference Beneficial Use of Recycled Materials in Transportation Applications, Air and Waste Management Association, Pittsburgh, PA, 1-10.

Abichou, T., Benson, C., Edil, T., and Freber, B. (1998), Using Waste Foundry Sand for Hydraulic Barriers, Recycled Materials in Geotechnical Applications, GSP No. 79, ASCE, C. Vipulanandan and D. Elton, eds., 86-99. [pdf]

Abichou, T., Edil, T., Benson, C., and Tawfiq, K. (2004), Hydraulic Conductivity of Foundry Sands and Their Use as Hydraulic Barriers, Beneficial Reuse of Waste Materials in Geotechnical and Transportation Applications, GSP No. 127, A. Aydileck and J. Wartman, eds., ASCE, Reston, VA, 186-200. [pdf]

Abichou, T., Tawfiq, K., Edil, T., and Benson, C., (2004), Behavior of a Soil-Tire Shreds Backfill for Modular Block Wall, Beneficial Reuse of Waste Materials in Geotechnical and Transportation Applications , GSP No. 127, A. Aydileck and J. Wartman, eds., ASCE, Reston, VA, 162-172. [pdf]

Benson, C. and Edil, T. (1995), Using Scrap Tires in Civil & Environmental Construction, Resource Recycling, Oct. 1995. [pdf]

Benson, C. and Khire, M. (1993), Soil Reinforcement with Strips of Reclaimed HDPE, Geosynthetics 93, Industrial Fabrics Assoc. Intl., St. Paul, 935-948.

Benson, C. and Khire, M. (1994), Reinforcing Sand with Strips of Reclaimed High Density Polyethylene, J. of Geotech. Eng., ASCE, 120(5), 838-855. [pdf]

Bin-Shafique, M., Benson, C., Edil, T. (2002), Geoenvironmental Assessment of Fly Ash Stabilized Subbases, Geo Engineering Report 02-03, Dept. of Civil and Environmental Engineering, University of Wisconsin-Madison. [pdf]

Bin-Shafique, S., Benson, C., Edil, T., and Hwang, K. (2005), Leachate Concentrations from Water Leach and Column Leach Tests on Fly-Ash Stabilized Soil, Environmental Engineering Science, in press. [pdf](35)

Bin-Shafique, S., Edil, T., and Benson, C. (2004), Incorporating a Fly Ash Stabilized Layer into Pavement Design ­ Case Study, Geotechnical Engineering , 157(4), 239-249. [pdf]

Dingrando, J., Edil, T., and Benson, C. (2004), Beneficial Reuse of Foundry Sands in Controlled Low Strength Material, J. of ASTM International , 1(6), 1-12. [pdf]

Edil, T. and Benson, C. (1998), Geotechnics of Industrial Byproducts, Recycled Materials in Geotechnical Applications, GSP No. 79, ASCE, C. Vipulanandan and D. Elton, eds., 1-18. [pdf]

Edil, T. and Benson, C. (2002), Use of Industrial By-Products as Geo-Materials, Geo Strata, April 2002, 28-29. [pdf]

Edil, T., Benson, C., Bin-Shafique, M., Tanyu, B., Kim, W., and Senol, A. (2002), Field Evaluation of Construction Alternatives for Roadway Over Soft Subgrade, Transportation Research Record, 1786, 36-48. [pdf]

Foose, G., Benson, C., and Bosscher, P. (1996), Sand Reinforced with Shredded Waste Tires, J. of Geotech. Eng., ASCE, 122(9), 760-767. [pdf]

Goodhue, M.. Edil, T., and Benson, C. (2001), Interaction of Foundry Sands with Geosynthetics, J. of Geotech. and Geoenvironmental Eng., ASCE, 127(4), 353-362. [pdf]

Kleven, J., Edil, T., and Benson, C. (2000), Evaluation of Excess Foundry System Sands for Use as Subbase Material, Transportation Research Record, No. 1714, 40-48. [pdf]

Lee, T. and Benson, C. (2004), Using Waste Green Sands for Treating Alachlor and Metolachlor in Groundwater, J. of Environmental Quality, 33(5), 1682-1693. [pdf]

Lee, T. and Benson, C. (2005), Leaching Behavior of Green Sands from Gray-Iron Foundries Used for Reactive Barrier Applications, Environmental Engineering Science , in press. [pdf]

Lee, T., Benson, C., and Eykholt, G. (2004), Waste Green Sands as Reactive Media for Groundwater Contaminated with Trichloroethylene, J. of Hazardous Materials , 109 (1-3), 25-36. [pdf]

Miller, E., Bahia, H., Benson, C., Khatri A., and Braham, A. (2001), Utilization of Waste Foundry Sand in Hot Mix Asphalt Mixtures, American Foundry Society Transactions, 103(1), 1393-1407.

Palmer, B., Edil, T. and C. H. Benson (2000), Liners for Waste Containment Constructed with Class F and C Fly Ashes, J. of Hazardous Materials, 18( 2-3), 133-161. [pdf]

Senol, A., Bin-Shafique, M., Edil, T., and Benson, C. (2002), Use of Class C Fly Ash for Stabilization of Soft Subgrade, Proc. 5th International Congress on Advances in Civil Engineering, Istanbul Technical University, Istanbul, Turkey, 963-972.

Senol, A., Bin-Shafique, S., Edil, T., and Benson, C. (2003), Use of Class C Fly Ash for Stabilization of Soft Subgrade, ARI, Bulletin of the Istanbul Technical University , 53(1), 98-104.

Tanyu, B., Benson, C., Edil, T., and Kim, W. (2005), Equivalency of Crushed Rock and Three Industrial By-Products Used For Working Platforms During Pavement Construction, J. of the Transportation Research Board , 1874, 59-69. [pdf]

Tatlisoz, N., Benson, C., and Edil, T. (1997), Effect of Fines on the Mechanical Properties of Soil-Tire Chip Mixtures, Testing Soil Mixed with Waste or Recycled Materials, STP 1275, ASTM, M. Wasemiller and K. Hoddinott, eds., 93-108. [pdf]

Tatlisoz, N., Edil, T., and Benson, C. (1998), Geosynthetic Reinforced Walls and Embankments Using Soil-Tire Chip Mixtures, J. of Geotech. and Geoenvironmental Eng., ASCE, 124(11), 1109-1119. [pdf]

Trzebiatowski, B., Edil, T., and Benson, C. (2004), Case Study of Subgrade Stabilization Using Fly Ash: State Highway 32, Port Washington, Wisconsin, Beneficial Reuse of Waste Materials in Geotechnical and Transportation Applications , GSP No. 127, A. Aydileck and J. Wartman, eds., ASCE, Reston, VA, 123-136. [pdf]